Filter By:
- Bar Ends (3)
- BMX (5)
- Bottom Brackets (17)
- Brakes/Levers/Pads (52)
- Cables (21)
- Cassettes/Freewheels (21)
- Chainrings (7)
- Chains (34)
- Show More Categories
- Cranksets (8)
- Derailleurs (14)
- Forks (1)
- Handlebar Grips/Tape (21)
- Handlebars (7)
- Headsets (11)
- Pedals (31)
- Saddles (28)
- Seatposts (3)
- Shift/Brake Combinations (1)
- Shifters (11)
- Stems (18)
- Other (86)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

$0.50
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

$1.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool

$2.00
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains

$2.00
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating

$3.99
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps.
- Sold individually, includes bolt, washer and nut

$4.00 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm

$4.00
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes
- Model: Front

$4.49 - $44.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

$4.99
- Compatible with Shimano HG40/50/70/90 chains
- KMC Z50, Z7, Z8, X8.93, X8.99 chains
- Reusable
- No Tool Required
- Pin Length: 7.3 mm

$5.00
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.

$5.49 - $11.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

$5.99 - $14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

$5.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

$5.99 - $9.99
The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

$5.99
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes

$6.95 - $11.99
Replacement inserts for Shimano cartridge v-brake pads
- Black: standard compound designed for dry condition riding
- Red: semi-aggressive compound for good performance
- Salmon: aggressive compound for extreme weather conditions
- Green: designed for ceramic coated rims
- Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

$7.99
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy

$7.99
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs

$8.00
$19.99
60% Off
The K-EDGE Road Chain Catcher is THE Original Chain Catcher used by professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia.
The K-EDGE chain catcher is a simple add-on component machined to precision which improves the overall function of your drive train and protects your valuable frame from dropped chains.
- Material: 6061-T6 CNC machined Aluminum
- Fitment: All braze-on mounted front derailleurs*
- Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs
* Not compatible with Campy EPS
* May not work with all third party braze-on adapter clamps
- Made in Boise, Idaho, USA,
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Page 1 of 14
Next page